Construction materials & assembly

HR steel plate

Back to list Send request

Hot-rolled sheets are produced by hot-rolling steel pieces. Sheets can be of normal and high-precision with sheared or milled edges. Hot-rolled sheets are widely used in construction as load-bearing structural floors, in mechanical engineering and in light and heavy industry. They are supplied as ready-cut sheets or coils. Depending on the application, they may have different surface or be further hardened.

 

 

Products Description HR steel plates.
Details of Mills, Characteristics 5,000 mm Plate Mill – dimensions: 8-160 х 1,500-4,800 х 6,000-24,000 mm. Final sizes to be agreed upon at contract signing.
Application Delivery Standard Document Dimensions, mm Steel Grades
Pipe-Making Industry

 

 

API 5L*, EN 10208-2* 8.0-40.0 х 1500-4400х11800/ 12500/ 18200 Х120, X42-X100, L360MB, L450MB, L485MB, К52, К55, К60, К65, К80
TU 14-101-724-2009*
TU 14-101-725-2009* 10.0-40.0 х 3,054-4,375 х 11,800/  12,500/ 18,200 К60 (Х70), К65 (Х80)
TU 14-101-727-2009* 27.7 х 4,348 х 11,650/ 12,200 К65
TU 14-1-5577-2009 9.9-37.9 х 1,617-4,372 х  11,500-11,800 К60, К65
TU 14-101-726-2009* 8.0-40.0 х 1,500-4,400 х 11,650/ 12,200 L245NS, L290NS, L320NS, L360NS, L245QS, L290QS, L320QS, L360QS, L390QS, L415QS, L450QS, L480QS L245MS, L290MS, L320MS, L360MS, L390MS, L415MS, L450MS, L480MS
TU 14-101-728-2009* 32.0 х 4,315 х 11,650/ 12,200 К60
14.1 х 3,128 х 11,650/ 12,200

22.2 х 3,103 х 11,650/ 12,200

27.0 х 3,088 х 11,650/ 12,200

Х60
19.0 х 3,734 х 11,650/ 12,200

24.6 х 3,717 х 11,650/ 12,200

32.0 х 3,694 х 11,650/ 12,200

Х70
TU 14-101-729-2009* 12.7 х 3,750 х 12,000/ 12,200/ 12,300

14.3 х 3,746 х 12,000/ 12,200/ 12,300

22.2 х 3,721 х 12,000/ 12,200/ 12,300

Х70
TU 14-101-730-2009* 27.0 х 2,758 х 12,300 SAWL 485
TU 14-101-731-2009* 39.0 х 2,768 х 12,300 SAWL 485
TU 14-1-5574-2009 8.0-32.0 х 1,500-4,450 х  11,500-12,000 К52, К54, К55, К56, К60, Х56, Х60, Х65, Х70
TU 14-1-5575-2009 10.0-35.0 х 1,500-3,800 х  11,500-11,600 К56, К60
TU 14-1-5576-2009 8.0-35.0 х 1,500-3,800 х  11,500-11,800 К42, К48, К50, К52, К54, К55, К56, К60
TU 14-1-5582-2009 8.0-40.0 х 1,500-4,400 х  11,650-12,200 К60
TU 14-101-721-2009* 8.0-10.0 х 1,575-2,229 х  11,500-12,000 08HGNFBD (К55)
TU 14-101-722-2009* 8.0-16.0 х 1,566-2,535 х  11,500-12,000 07GFB-U (К54)
TU 14-101-732-2009* 10.0-30.0 х 1,560-3,147 х 11,800 К48, К50, К52, X42SS, X46SS, X52SS
Boiler Construction GOST Standard 5520-79, categories 1-22 8.0–160.0 х 1,500–4,800 х 6,000-24,000

8.0-60.0 х 1,500–4,800 х 6,000-24,000

25.0-70.0 х 1,500–4,800 х 6,000-24,000

8.0-160.0 х 1,500–4,800 х 6,000-24,000

09G2S, 15К, 20К, 22К, 12ХМ
ASTM A516*  

8.0-70.0 х 1,500–4,800 х 6,000-24,000

Grade 70
EN 10028-2* P235 – P355
Bridge Construction GOST Standard 6713-91, categories 1-3 8-40 х 1,500–4,800 х 6,000-24,000

8-50 х 1,500–4,800 х 6,000-24,000

8-60 х 1,500–4,800 х 6,000-24,000

10HSND, 15HSND, 16D
Shipbuilding Industry GOST Standard 5521-93, Supervised by Certification Bodies/Registers: GL, LR, DNV, BV 8-60 х 1,500–4,800 х 6,000-24,000

8-50 х 1,500–4,800 х 6,000-24,000

8-40 х 1,500–4,800 х 6,000-24,000

A, B, D, E, А32, А36, D32, D36, E32, E36 А40, D40, Е40
GOST Standard Р  52927-2008* 8.0-70 х 1,500–4,800 х 6,000-24,000 A, B, D, E, А32, А36, А40, A27S, A27SW, D32, D36, D40, D27S, D27SW, E32, E36, E40, E27S, E27SW, BZ25, DZ25, EZ25, BZ35, DZ35,EZ35, (A32-A40)Z25, (A32-A40)Z35, (D32-D40) Z25, (D32-D40)Z35,

(E32-E40)Z25, (E32-E40) Z35, A27SZ25, A27SZ35, D27SZ25, D27SZ35, E27SZ25, E27SZ35,

(A36-A40)W,  (D32-D40)W,(E32-E40)W, BW, DW, EW, FW, (F32-40)W, F36SW,F40SW, D460W, E460W,  F460W

8.0-80.0 х 1,500-4,800 х  6,000-24,000 D500W, E500W, F500W
8.0-50.0 х 1,500-4,800 х  6,000-24,000 A40S, D40S, E40S, A40SW, D40SW,  E40SW
Others GOST Standard 1577-93 8-160 х 1,500–4,800 х 6,000-24,000 08-25 (ps, sp), 30-70, 15G, 20G, 30G, 40G, 50G, 20H, 40H
GOST Standard 14637-89, categories 1-6 St0-St5 (sp, ps, Gps)
GOST Standard 19281-89, categories 1-15 (strength class 265) 09G2S, 16GS
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Others

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GOST Standard 19281-89, categories 1-15 8-32 х 1,500–4,800 х 6,000-24,000 (strength class 295) 09G2, 09G2S, 16GS
32-100 х 1,500–4,800 х 6,000-24,000 (strength class 295) 10G2S1
8-10 х 1,500–4,800 х 6,000-24,000 (strength class 315) 12GS
10-20 х 1,500–4,800 х 6,000-24,000 (strength class 315) 16GS
20-60 х 1,500–4,800 х 6,000-24,000 (strength class 315) 10G2S1
8-10 х 1,500–4,800 х 6,000-24,000 (strength class 325) 16GS
10-20 х 1,500–4,800 х 6,000-24,000 (strength class 325) 09G2S, 17GS, 10G2S1
20-32 х 1,500–4,800 х 6,000-24,000 (strength class 325) 14G2
20-60 х 1,500–4,800 х 6,000-24,000 (strength class 325) 10G2S1
8-10 х 1,500–4,800 х 6,000-24,000 (strength class 345) 09G2S, 17GS, 10HNDP, 10G2S1
10-20 х 1,500–4,800 х 6,000-24,000 (strength class 345) 17G1S
10-32 х 1,500–4,800 х 6,000-24,000 (strength class 345) 15HSND
8-10 х 1,500–4,800 х 6,000-24,000 (strength class 355) 17G1S
10-40 х 1,500–4,800 х 6,000-24,000 (strength class 390) 10HSNSD
DIN 17100 8.0-160.0 х 1,500–4,800 х 6,000-24,000 St37-2 – St52-3
EN 10025 S235, S275, S355 (J2, J0, JR)
ASTM A 36 (STO MMK 289-2008 standard) А36
JIS G 3101 (STO MMK 289-2008 standard) SS400
Products Description HR steel sheets and plates.
Details of Mills, Characteristics HR Mill “2500” – dimensions: 1.5-12х1000-2350х2000-6100, 11000-12000 mm. Mill “2350” – dimensions: 8-30х1250-2000х4200-12000 mm. Mill “4500” – dimensions: 30-160х1400-3300х3500-9000 mm. Final sizes to be agreed upon while contract execution.
Application Delivery Standard Document Dimensions, mm Steel Grades
General application GОSТ 16523 thickness less than 4 mm St1-St3 (kp, ps, sp), 08-20 (kp, ps, sp), 25
GОSТ 14637 thickness 4 mm and over St0, St2-St5 (of all deoxidation degrees)
General and special application GОSТ 1577 08-20 (kp, ps, sp), 25
thickness 12 mm and over 30-45
For welded, riveted and bolted structures GОSТ 19281 thickness 4 mm and over 09G2, 09G2S, 10G2S1, 17GS, 17G1S, 10HSND, 15HSND
For manufacture of parts for high- pressure vessels and boilers GОSТ 5520 4-100х1400-2700х3000-8000 15К-22К, 09G2S, 16GS, 17GS, 17G1S
TU 14-1-3922 61-160х1500-2700х4000-8000 20К
For shipbuilding GОSТ 5521  4-10х1250-1850х2500-6000  8-25х1250-2000х4200-8000 (РС)А, (РС)В, (РС) D, (РС)A32, (РС) D32, (РС)A36, (РС) D36
TP 14-101-334
For manufacture of bridge structures GОSТ 6713  4-10х1250-1850х2500-6000  8-25х1500-2000х4200-11700 16D, 10HSND, 15HSND
For welded pipes manufacturing TU 14-1-1921 7-14х1600-2000х11500 12GS, 17GS, 17G1S
TU 14-1-1950 7-17.5х1250-1650х11000-11800 17G1S-Y
TU 14-1-3636 8х1629х11500 13G1S-Y
TP 14-101-437 7.0-10.3х2000-2100х12000 13G1S-Y
STO ММК 221 6-14х1250-1750х8000-12000 09GSF
TU 14-106-502 2-14х1250-1700х4000-11800 17GS, 17G1S, 2GYu
TS 14-101-494 8-12х1570-1629х11500-12000 12G2SB
For cold forming (stamping) TU 14-1-3684 4.5-8.0х280-520х2500-6000 08YuA, 15kp, 20kp, 20
For welded, riveted and bolted structures STO ММК 177 10-60х1500-2000х6000-8000 St37-2, RSt37-2, St44-2, St52-3 as per DIN 17100
STO ММК 209 1.5-12.0х1000-1850х2000-11700 S235 (JR, JRG2, J0, J2G4), S275 (JR, J0, J2G4), S355 (JR, J0, J2G4, K2G4) as per EN 10025
STP 14-101-211 10-60х1500-2000х6000-8000 S235 (JR, JRG2, J0, J2G4), S275 (JR, J0, J2G4) as per EN 10025
For welded pipes manufacturing SТО ММК 242 1.5-6×1000-1650×2000-6100  4-12×1150-2350×3000-12000 A25, A-API 5L, B-API 5L, X42, X46, X52, X56, X60, X65, X70 as per API 5L
For welded, riveted and bolted structures SТО ММК 344 1.5-12.0×1000-1830×2000-11800 St37-2, RSt37-2, St44-2, St44-3, St52-3 as per DIN 17100
For welded, riveted and bolted structures SТО ММК 350 SS330, SS400-1, SS400-2 as per JIS G 3101; A36-1, A36-2 as per ASTM A36/A36M
General application SТP ММК 352 2.0-10.0х1219-1830х2438-11800 SAE1006, SAE 1008, SAE 1009, SAE1010, SAE1012, SAE1015, SAE1017, SAE1019, SAE1020, SAE1021, SAE1022, SAE1023, SAE1025 as per ASTM A568/A568M and ASTM A635/ A635M
For construction applications SТО ММК 364 1.5-12.0×1000-1830×2000-6096 Gr.30, Gr.33, Gr.36, Gr.40, Gr.45, Gr.50, Gr.55 as per ASTM A570/A570M
For steel products manufactured by means of stamping, bending and welding TU 14-101-362 2-10х1219-1685х2500-6000 А569 as per ASTM A569/A569M
For general and construction applications TP 14-101-376 4-12х1020-1829х2500-6000 300W as per CAN/CSA
For shipbuilding STP ММК 375 4-25х1250-2000х3500-12000  

GL-A, GL-B, GL-D, GL-A32, GL-D32 (supervised by the German Lloyd’s)

LR 2008 4-25х1250-2000х9000 LR-A (supervised by the British Lloyd’s)
For connecting parts of main pipelines TU 14-105-644 12-28х1300-2000х6000-11800 10G2FBYu
General application TP 14-101-392 60-140х1500-1700х2500-6700 10HSND, 09G2S
TP 14-101-462 10-130х1500-2000х4000-8000 St3GpsV, St3GspV
Packing In bundles of up to 10 mt for sheets from Mill “2500”. In bundles of up to 10 mt for sheets from Mill “2350” to be exported. No packing for sheets from Mill “4500”. No packing for sheets from Mill “2350” to be delivered to domestic market.
Marking Metal tags – for bundles. Painting and stamping – for sheets without packing.