Industriālas iekārtas un sistēmas

Caliper Brakes Type SHI

Atpakaļ uz katalogu Nosūtīt pieprasījumu

Caliper Brakes type SHI are used as holding and emergency stop brake, installed on output shaft connected drive components such as the flange of hoist rope drums or the idler pulley of a conveyor belt.

They serve to protect the drive e.g. in case of gear box failure.

Emergency stop brakes for heavy duty operation and coasting. Ideal for hoists on container cranes and casting cranes, for large belt conveyor systems, cable cars, etc.

The SHI series brakes consist of two independent halves with facing spring packages and hydraulic cylinders. The brake shoes are supported by parallel key which absorbs the braking force.

The brake shoes with linings are hydraulically retracted from the disc during opening of the brakes.

The brakes can be used horizontally or vertically, predominantly as an emergency brake.

Fast response time for maximum safety

Suitable for different disc thicknesses

No tangential forces onto pistons and seals during  dynamic braking

Low spare parts and maintenance requirement due to using only one dynamic seal per cylinder

Simple and fast manual wear compensation

Easy and quick replacement of pad carriers

Low wear, high thermal capacity Sinter-linings are standard for most SHI-brakes and manual compensation of lining wear is easily completed within few minutes.